JONARD | Optical Light Source with FC/LC/SC Adapters for PC/UPC Connectors | #FLS-50
JONARD TOOLS | PART #FLS-50
Optical Light Source with FC/LC/SC Adapters for PC/UPC Connectors
DESCRIPTION
Designed to provide either 1310 nm or 1550 nm wavelengths, this optical light source is the perfect tool for providing a stable light source for single mode fiber measurements. This optical light source features the following
- Includes FC, SC, and LC adapters to directly connect to UPC/PC FC, SC, and LC fiber connectors
- Highly stable output power and wavelengths
- Has four different modulation outputs (CW, 270 Hz, 1 kHz, 2 kHz) at 1310 N-m and 1550 nm wavelengths
- Flush button design makes it easy to use and prevents dust from entering the unit
- Shatter-resistant sleeve protects the light source from falls or other damage
- Backlit LCD screen provides a clear display, ideal for dark places
Includes:
- Fiber Optic Light Source
- FC Adapter
- LC Adapter
- SC Adapter
- (2) Cleaning Swabs
- (3) AA Batteries (required for operation)
- Storage Pouch
Fiber Type: Single-mode
DOCUMENTS
FLS-50 Optical Light Source Datasheet
FLS-50 Optical Light Source Instruction Manual
FLS-50 Light Source Setup Quick Reference Card
FLS-50 Light Source Calibration Steps
SPECIFICATIONS
| Connector Types |
1.25 mm LC and 2.5 mm FC/SC |
|---|---|
| Wavelengths (nm) |
1310, 1550 |
| Typical Output Power |
-7 dBm |
| Output Stability |
± 0.05 dB / 15 min or ± 0.1 dB / 8 hr |
| Operating Temperature |
-10 ± 60°C |
| Spectral Width |
≤ 10 nm |
| Modulation Frequencies |
CW / 270 Hz / 1 kHz / 2 kHz |
| Battery Type |
(3) AA 1.5V alkaline batteries |
| Storage Temperature |
-25 ± 70°C |
| Dimensions |
7" x 3 3/16" x 1 1/4" (17.78 cm x 8.10 cm x 3.18 cm) |
| Weight | 0.67 lb (304.18 g) |
| UPC # | 811490018655 |
Common Questions About the Optical Light Source
What is the Optical Light Source used for?
The Optical Light Source is used to provide a stable, calibrated light signal for testing, measuring loss, and verifying performance in single mode fiber optic networks.
Who is this optical light source designed for?
This light source is designed for fiber optic technicians, telecom installers, and network maintenance crews performing installation, troubleshooting, and verification testing.
What makes this light source different from basic single mode test sources?
This light source offers highly stable output at both 1310 and 1550 nm wavelengths, multiple modulation tones, and includes FC, SC, and LC adapters for direct connection to common fiber connectors.
At a Glance
• Designed for single mode fiber testing
• Provides 1310 and 1550 nm wavelengths
• Includes FC, SC, and LC PC or UPC adapters
• Stable output with multiple modulation tones