FasClamp | Fiber Optic Cable Clamp System (Standard) | #FAS100
FasClamp | PART #FAS100
Fiber Optic Cable Clamp System

DESCRIPTION
- Built out of steel
- Powder coated to withstand the abuse and weather in field use
- Predrilled screw holes to allow attaching to solid surface for secure nonslip gripping
- Fully welded construction for fail safe use, no rivets or screw that may become compromised over time
- Hinge plug welded, not riveted or screwed to upper and lower clamp plates
- Commercial grade flexible rubber gasket which is attached with 3m pressure sensitive tape to inside of upper and lower clamp plates. The flexibility allows for the ultimate grip on any cable, including optical ground wire, without any slippage. Is not affected by common cleaning agents used to clean the fiber cables, including d-gel, alcohol, etc.
- Clamp has a full 12” long by 3 ¼" gripping surface. This is larger than others and provides more stability and gripping area for cable immobility
- The clamp opens to greater than 90 degrees for ease of laying the cables into the clamp
- Requires NO adjustment with tools. Simply open, lay cables across surface, flip top of clamp down and tighten the large machine nut with one hand. Tighten as much as needed to prevent slippage. This allows one hand to hold the cables or enclosure in place while securing the cables into clamp. Other clamps require adjustment at times of a plunger bolt requiring usage of tools and stoppage of work
- Designed to hold the cables and NOT the enclosure. Other clamps grip the enclosure itself but are enclosure specific. By gripping the cables, this clamp can be used in any prepping or splicing scenario without being limited to enclosure style.
- Designed for new or existing plant
- Allows bundles of cables or single flat drop cables. Hinge side is wider for larger bundles or diameter cables while the machine nut side can be tightened down and cinch onto the smaller diameter cables
- Weight: 5lbs
- Dimensions: 7” x 16” x 31⁄4”
Common Questions About the FasClamp FAS100 Fiber Optic Cable Clamp System
What is the FasClamp FAS100 Fiber Optic Cable Clamp System used for?
The FasClamp FAS100 is a professional fiber optic cable clamping system designed to securely hold cables in place during preparation, splicing, mid-span entry, and buffer tube shaving. Developed by a fiber splicer with 25 years of field experience, it helps prevent cable movement and slippage while technicians work on new or existing fiber optic networks. It can be mounted in splicing vehicles, trailers, or on indoor worktables.
What types of fiber optic cables are compatible with the FasClamp FAS100?
The FAS100 accommodates multiple cable types and diameters, including flat drop cables, ribbon cables, loose tube cables, optical ground wire (OPGW), and larger cable bundles. Its flexible, commercial-grade rubber gaskets on the upper and lower clamp plates provide a secure, non-slip grip. The design allows technicians to secure different cable sizes simultaneously without requiring enclosure-specific clamps.
How does the FasClamp FAS100 improve safety and efficiency during fiber splicing?
The FAS100 features a tool-free clamping mechanism that allows technicians to position cables, close the hinged upper plate, and tighten the large machine nut with one hand. Its 12-inch by 3.25-inch gripping surface provides stability during cable preparation and splicing, helping reduce unwanted movement during sensitive procedures such as mid-span entry on live fiber cables. Fully welded steel construction, a powder-coated finish, and predrilled mounting holes provide durability and secure installation in demanding field environments.
At a Glance
• Heavy-duty fiber optic cable clamp system for cable preparation, splicing, and mid-span entry
• Accommodates flat drop, ribbon, loose tube, OPGW, and multiple cable diameters simultaneously
• Large 12-inch x 3.25-inch gripping surface with non-slip rubber gaskets
• Fully welded steel construction with weather-resistant powder-coated finish
• Tool-free, one-handed tightening mechanism with hinged opening greater than 90 degrees
• Predrilled mounting holes for vehicles, trailers, and worktables; weighs 5 lbs and measures 7 x 16 x 3.25 inches