JONARD | COAX Cable Stub End Stripper (6 mm/10 mm) | #CSS-5610

JONARD TOOLS | PART #CSS-5610

COAX Cable Stub End Stripper (6 mm/10 mm)

The CSS-5610 is a coaxial cable stripper specifically designed to strip the stub end of a coax cable in a wall outlet, exposing 6 mm of braid and 10 mm of the center conductor, which eliminates the need to run a new cable. This coaxial cable stripper features the following

• Easy to use: Simply insert cable, rotate like a screwdriver, and remove to strip
• Will not cut or damage the braid or score the center conductor
• High carbon steel blades last for over 5,000 strips on each side
• The hook and loop strip on the bottom of the tool is used to fold back braid on cable after being stripped
• Can be used with other blade cartridges, such as the CSS-105/110/115/120/130/135
• The replacement cartridge for this tool is: CSS-125

Blade Replacement Instructions:

• To replace blade cartridge: open jaws and push upwards on the front of the blade cartridge. The cartridge will lift out.
• To install a new blade cartridge: insert the cartridge into the tool and close jaws. Give the jaws a squeeze to ensure the blade locks into place.