FasClamp | Fiber Optic Cable Clamp System (XL) | #FASXL
FasClamp | PART #FASXL
Fiber Optic Cable Clamp System (XL)

DESCRIPTION
- Built out of 1/8ā steel
- Powder coated to withstand the abuse and weather in field use
- Predrilled screw holes to allow attaching to solid surface for secure nonslip gripping
- Fully welded construction for fail safe use, no rivets or screw that may become compromised over time
- Bolts and machine nuts used to tighten are stainless steel
- Commercial grade flexible rubber gasket which is attached with 3m pressure sensitive tape to inside of upper and lower clamp plates. The flexibility allows for the ultimate grip on any cable, including optical ground wire, without any slippage. Is not affected by common cleaning agents used to clean the fiber cables, including d-gel, alcohol, etc. Withstands hot and cold environments.
- Clamp has a full 12ā long by 3 1ā4" gripping surface. This is larger than others and provides more stability and gripping area for cable immobility
- Top bracket is slotted and removable for ease of placing and removing cables
- Requires NO adjustment with tools. Simply open, lay cables across surface, replace top bracket and tighten the large machine nut with one hand. Tighten as much as needed to prevent slippage. This allows one hand to hold the cables or enclosure in place while securing the cables into clamp. Other clamps require adjustment at times of a plunger bolt requiring usage of tools and stoppage of work
- Designed to hold the cables and NOT the enclosure. Other clamps grip the enclosure itself but are enclosure specific. By gripping the cables, this clamp can be used in any prepping or splicing scenario without being limited to enclosure style.
- Designed for new or existing plant
- Allows large or small bundles of cables or single flat drop cables.
- Weight: 6lbs - Dimensions: 7ā x 16ā x 31ā4ā (T-Bolts 6ā long)
Ā
Common Questions About the FasClamp FASXL Fiber Optic Cable Clamp System (XL)
What is the FasClamp FASXL Fiber Optic Cable Clamp System used for?
The FasClamp FASXL is a heavy-duty, extra-large fiber optic cable clamping system designed to securely hold cables in place during preparation, splicing, mid-span entry, and buffer tube shaving. Developed by a fiber splicer with 25 years of field experience, it helps prevent cable movement and slippage during critical fiber optic work. It can be mounted in splicing vehicles, trailers, or on indoor worktables.
What types and sizes of fiber optic cables can the FasClamp FASXL accommodate?
The FASXL accommodates a wide range of fiber optic cables, including flat drop cables, ribbon cables, loose tube cables, optical ground wire (OPGW), and large cable bundles up to 6 inches. Its 12-inch by 3.25-inch gripping surface features flexible, commercial-grade rubber gaskets on both clamp plates to securely hold different cable diameters simultaneously. The design grips the cables rather than the enclosure, making it suitable for various fiber splicing applications.
How does the FasClamp FASXL improve safety and efficiency during fiber optic splicing?
The FASXL features a removable, slotted upper bracket that allows technicians to position cables and secure them using a tool-free, one-handed tightening mechanism. Its fully welded 1/8-inch steel construction, stainless steel hardware, and powder-coated finish provide durability in demanding field environments. The non-slip rubber gaskets help minimize cable movement during sensitive procedures, including mid-span entry on live fiber networks, while providing a more secure and organized alternative to zip ties.
At a Glance
⢠Extra-large fiber optic cable clamp system for cable preparation, splicing, and mid-span entry
⢠Accommodates flat drop, ribbon, loose tube, OPGW, and fiber cable bundles up to 6 inches
⢠Large 12-inch x 3.25-inch gripping surface with flexible, non-slip rubber gaskets
⢠Fully welded 1/8-inch steel construction with powder-coated finish and stainless steel hardware
⢠Removable slotted upper bracket with tool-free, one-handed tightening mechanism
⢠Predrilled mounting holes; weighs 6 lbs and measures 7 x 16 x 3.25 inches with 6-inch T-bolts