Polywater | Lubricant Squeeze Bottle | #CGL-35

Polywater | PART #CGL-35

Prelube 2000™ Cable Blowing Lubricant

DESCRIPTION

Polywater® CGL is a slow-drying gel cable pulling lubricant that leaves a thin, slippery film that retains its lubricity for months after use. Polywater CGL does not sustain flame when used with fire-retardant cables and systems. Its dried residue is nonconductive and noncombustible. Ideal for fiber optic, copper or coaxial cable pulls.

• Low Friction Coefficient: Tension reduction on all types of cable jackets.
• High Cling Factor: Clings to jacket for better lubrication on long runs.
• Specification Grade: Meets performance requirements in outside plant and premise applications.
• Clean: Contains no grease or waxes and will not cement cables in conduit.
• Compatible: Including LSZH/LSHF, fire-rated, and plenum cable jackets.

SPECIFICATIONS & APPLICATIONS

• Appearance: Opaque-white stringy gel. Light gel viscosity (35,000-50,000 cps @ 10 rpm).
• Combustibility: CGL has no flash point and dried residue is non-flammable.
• Coatability: CGL will wet out evenly on cable jacket surfaces. It will not bead up or rub off the cable jacket. A 1-inch diameter XLPE cable dipped 6 inches into CGL and then withdrawn and held vertically will retain at least 25 grams of CGL for 1 minute at 70°F.
• Cable Compatibility: No deleterious effects on physical or electrical properties of cable jackets.
• Polyethylene Stress Cracking: No stress cracking on LDPE cable jackets when tested by ASTM D1693.

PRODUCT & PACKAGE NOTES

• Meets Telcordia GR-356-CORE; Generic Requirements for Optical Cable Innerduct, Associated Conduit, and Accessories.
• UL Listed. UL Listed to Canadian safety standards.
• Polywater CGL is a gel material and can be applied by hand or using Polywater’s LP-D5 pump.
• Polywater CGL is safe for the aquatic environment and meets California regulation CCR 22.
• Polywater CGL is suitable for use on PE and low-smoke zero-halogen (LSZH) communication cable jackets.
• Polywater CGL comes in two grades: Regular Grade and Winter Grade (for cold weather use in temperatures as low as -20°F / -30°C).
• Polywater CGL can also be pumped using the LP-D5 Drill-Powered Pump.