VeEX | FX40 Optical Power Meter (OPM) +26dBm to -50dBm | #FX40

FX40 Optical Power Meter (OPM) +26dBm to -50dBm

DESCRIPTION

Fiberizer® software for Windows® Desktop, Android™, and/or Apple® mobile devices is available to assist in data transfer, record management, and report generation for various VeEX fiber optics testers. View the Fiberizer webpage for more details

INCLUDES

• FX40 Optical Power Meter, with Alkaline Battery support and VFL, 1mW, equipped with universal 2.5 mm receptacle with dust cap
• Carrying Pouch for V40
• Quick Reference Guide, FX40, Getting Started Guide Applicable to FX45/FX48
• 1-Year Standard Warranty from initial purchase
• OTG Cable, Micro-B USB (m) L-shape to Micro-B USB(m) L-shape, 1.8m

FEATURES

• Singlemode and Multimode testing
• Built-in universal 2.5 mm tip sleeve
• PON, Telecom, CATV and LAN/WAN applications
• Dual wavelength laser source and power meter options
• High accuracy and wide dynamic range
• Save OPM measurements (>100 single results)
• Transfer stored results to a PC or upload results to Fiberizer Cloud via micro USB interface for report generation and printing
• Reference power level setup and recall
• Splash resistant keypad and chassis design
• High contrast display - Visible outdoors and backlight for indoor or low light conditions
• Alkaline or Rechargeable battery option with Auto power off
• Field interchangeable optical adaptors support multiple connector types and allow easy access for cleaning

FX40 SERIES DATASHEET

SPECIFICATIONS

Optical Power Meter (OPM) ³

• Calibrated wavelengths: 850, 1300, 1310, 1490, 1550, 1625, 1650 nm
• Power Level Range:
  -PM1 version: -65 to +7 dBm
  -PM2 version: -50 to +25 dBm
• Accuracy^1,2: up to ±0.2 dB or 5%
• Modulation and Wave ID detection: Not supported

General

• Results saving: 100 without timestamp
• OPM Remote control data transfer using LT-Sync PC software
• Communication port: micro USB
• OLS/OPM adaptor types: FC/SC/ST/LC/E2000, Universal 1.25 mm, Universal 2.5 mm
• Battery: Alkaline (AA) or Optional NiMH with 5V micro-USB power adaptor
• Battery operating time: approximately 100 hours (without backlight)

Notes:
1. PM1: SM ±5% at -50 to +7 dBm; ±10% -65 to -50 dBm; MM ±8% at -50 to +7, ±13% at -65 to -50 dBm. Applies only with OPM fitted with SC or FC adaptor.
2. PM2: SM ±5% at -35 to +25 dBm; ±10% -50 to -35 dBm; MM ±8% at -35 to +25 dBm; ±13% -50 to -35 dBm. Applies only with OPM fitted with SC or FC adaptor.
3. FX40 can support a maximum of two configurations: OLS/VFL or OPM/VFL
4. Limited to certain configurations

Common Questions About the VeEX FX40 Optical Power Meter

What is the VeEX FX40 Optical Power Meter used for?
The VeEX FX40 Optical Power Meter is used to measure optical signal levels during fiber installation, service activation, and troubleshooting across PON, telecom, CATV, and LAN or WAN networks.

Is this FX40 a light source or a power meter?
This configuration of the FX40 is an optical power meter with integrated VFL. It measures optical power levels and does not function as a standalone light source unless configured with an OLS option.

Who uses the FX40 optical power meter?
The FX40 is commonly used by fiber technicians, installers, and maintenance crews who need accurate power level measurements on singlemode and multimode fiber.

How the FX40 Supports Fiber Testing and Verification

The VeEX FX40 Optical Power Meter provides accurate, wide-range optical power measurements for day-to-day fiber testing. With support for multiple calibrated wavelengths, long battery life, and compatibility with Fiberizer software, it allows technicians to verify signal levels, document results, and generate reports efficiently in the field.

At a Glance

• Optical power meter for fiber signal level measurement
• Supports singlemode and multimode fiber
• Designed for PON, telecom, CATV, and LAN or WAN networks
• Wide dynamic range with high measurement accuracy
• Rugged handheld design with extended battery life