TEMPO | 100XL Visual Fault Locator | #100XL-C/A
TEMPO COMMUNICATIONS | PART #100XL-C/A
100XL Visual Fault Locator (VFL)
DESCRIPTION
The 100XL visual fault locator allows the technician to quickly and safely visually locate broken and pinched fibers, faulty connectors, and bad splices. The 4km reach of the 100XL allows the technician to confirm fiber continuity
OVERVIEW
- Visual fault locating
- Confirm fiber continuity
- Allows the technician to quickly locate faults without the use of more expensive equipment
- Class 2 designation, 1mW maximum output power
- 4km distance
- Universal 2.5mm bulkhead
- Optional 1.25mm adapter available
- Compatible with Singlemode and Multimode fibers
- 2Hz modulation mode
SPECIFICATIONS
| Attribute Name | Attribute Value |
|---|---|
| Maximum Output Power | 1MW |
| Laser Classification | Class 2 |
| Maximum Range | 4km |
| Wavelength | 650nm +/-10nm |
| Emitter Type | Fabry Perot |
| Modes of Operation | CW and 2Hz Modulation |
| Method of Display Operation | Red/Green LED |
| Fiber Type | Singlemode, Multimode |
| Connector Interface | 2.5mm Universal, Optional 1.25mm adapter |
| Battery Life | 20 hours AAA batteries |
| Weight | 3.5oz (100g) (not including batteries) |
| Dimensions | 4.3 x 1.1 x 0.67” (110 x 28 x 17mm) |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -40°C to +70°C |
Tempo 500 XL Data Sheet 02 24 25
500 XL and 100 XL Application Note
Common Questions About 100XL Visual Fault Locator
What is the 100XL Visual Fault Locator used for?
It is used to visually locate broken or pinched fibers, faulty connectors, and poor splices, and to confirm fiber continuity during installation and troubleshooting.
How far can the 100XL detect faults?
The 100XL has a maximum range of up to 4 km, making it suitable for both short and longer fiber runs.
Is the 100XL safe to use in the field?
Yes. It is a Class 2 visual fault locator with a maximum output power of 1 mW, designed for safe routine fiber testing when used properly.
What fiber types and connectors are supported?
It works with both singlemode and multimode fiber and includes a universal 2.5 mm bulkhead with an optional 1.25 mm adapter.
At a Glance
• Visual fault locating and fiber continuity testing
• Up to 4 km operating range
• Class 2 laser with 1 mW output
• Compatible with singlemode and multimode fiber
• Universal 2.5 mm connector with optional 1.25 mm adapter
• Continuous wave and 2 Hz modulation modes