Hand Tools

JONARD TOOLS | PART #RC-336ACSR Ratcheting Cable Cutter DESCRIPTION Designed for heavy-duty use, This cable cutter is designed to cut 336 MCM (170 ...

JONARD TOOLS | PART #DB-5 Rapid Microduct Deburring Tool DESCRIPTION Designed to deburr the insides of microduct tubes, this rapid microduct deburr...

JONARD TOOLS | PART #JIC-5028 Pump Pliers 8 inch DESCRIPTION Jonard’s pump pliers are made of ultra strong tool steel and are heat treated for maxi...

JONARD TOOLS | PART #JIC-5026 Pump Pliers 6 inch DESCRIPTION Jonard’s pump pliers are made of ultra-strong tool steel and are heat-treated for maxi...

JONARD TOOLS | PART #JIC-50210 Pump Pliers 10 inch DESCRIPTION Jonard’s pump pliers are made of ultra-strong tool steel and are heat-treated for ma...

JONARD TOOLS | PART #JIC-50212 Pump Plier 12 inch DESCRIPTION Jonard’s pump pliers are made of ultra-strong tool steel and are heat-treated for max...

JONARD TOOLS | PART #SDSP-2 Phillips Stubby Screwdriver, #2 x 3" DESCRIPTION Jonard's Stubby Phillips Screwdriver is made with an S2 steel shank wi...

JONARD TOOLS | PART #SDP-3 Phillips Screwdriver, #3 x 6 inch DESCRIPTION Jonard's Phillips Screwdrivers are made with an S2 steel shank with a chro...

JONARD TOOLS | PART #SDP-28 Phillips Screwdriver, #2 x 8" DESCRIPTION Jonard's Phillips Screwdrivers are made with an S2 steel shank with a chrome ...

JONARD TOOLS | PART #SDP-2 Phillips Screwdriver, #2 x 4" DESCRIPTION Jonard's Phillips Screwdrivers are made with an S2 steel shank with a chrome f...

JONARD TOOLS | PART #SDP-1 Phillips Screwdriver, #1 x 3" DESCRIPTION Jonard's Phillips Screwdrivers are made with an S2 steel shank with a chrome f...

JONARD TOOLS | PART #SD-00/10 Phillips Precision Screwdriver, #00 x 60 mm (Pack of 10) DESCRIPTION The Jonard Tools Precision Screwdrivers are made...

JONARD TOOLS | PART #INS-3150 Phillips Insulated Screwdriver, #3 x 6" DESCRIPTION Jonard's insulated screwdrivers are made of heat-treated chrome v...

JONARD TOOLS | PART #INS-2100 Phillips Insulated Screwdriver, #2 x 4" DESCRIPTION Jonard's insulated screwdrivers are made of heat-treated chrome v...

JONARD TOOLS | PART #INS-180 Phillips Insulated Screwdriver, #1 x 3" DESCRIPTION Jonard's insulated screwdrivers are made of heat-treated chrome va...

JONARD TOOLS | PART #SDKP-2 Phillips #00 & Cabinet-Tip Slotted Precision Screwdriver Set DESCRIPTION Designed for use on precision fasteners in...

JONARD TOOLS | PART #KWC-700 Multi-function Kevlar® & Wire Cutting Shears DESCRIPTION Designed with serrated blades, large cutting notch, non-i...

JONARD TOOLS | #CSS-59M Mini COAX Stub End Stripper (9 mm/7 mm) DESCRIPTION The CSS-59M is a coaxial cable stripper specifically designed to strip ...

JONARD TOOLS | PART #MS-836 Mid Span Slit & Ring Tool for RocketRibbon® Cable (11.6 mm-22.6 mm) DESCRIPTION The PATENTED MS-836 Mid Span Slit &...

JONARD TOOLS | PART #MS-336 Mid Span Slit & Ring Tool (7.9 mm-11 mm)  DESCRIPTION The PATENTED MS-336 Mid Span Slit and Ring Tool is designed t...

JONARD TOOLS | PART #MS-426 Mid Span Slit & Ring Tool (5.8mm-12mm) DESCRIPTION The patented and award-winning MS-426 Mid Span Slit and Ring Too...

JONARD TOOLS | PART #MS-326 Mid Span Slit & Ring Tool (5 mm-10 mm) DESCRIPTION The patented MS-326 Mid Span Slit and Ring Tool is designed to p...

JONARD TOOLS | PART #MS-306 Mid Span Slit & Ring Tool (1.2mm-3.3mm) DESCRIPTION The patented MS-306 Mid Span Slit and Ring Tool is designed to ...

JONARD TOOLS | PART #MDC-14 Microduct Tube Cutter DESCRIPTION Designed to cut microducts cleanly and straight, this microduct cutter is perfect for...

JONARD TOOLS | PART #MDC-28 Microduct Cutter DESCRIPTION Designed to create quick, clean, and straight cuts in fiber ducts up to 28 mm, this duct c...

JONARD TOOLS | PART #JIC-2257M-12 Metal Wire Loop Puller, 12" DESCRIPTION The Jonard Tools JIC-2257M-12 Metal Wire Loop Puller facilitates pulling ...

JONARD TOOLS | PART #JIC-203 Long Nose Switchboard Pliers DESCRIPTION Jonard’s long nose pliers are made of heat treated chrome vanadium steel for ...

JONARD TOOLS | PART #ELONGNOSE Long Nose Gripping Pressing Pliers DESCRIPTION Jonard’s long nose pliers are made of ultra strong tool steel and are...

JONARD TOOLS | PART #BLONGNOSE Long Nose General Use Pliers DESCRIPTION Jonard’s long nose pliers are made of ultra-strong tool steel and are heat-...

JONARD TOOLS | PART #JIC-842 Long Nose and Side Cutting Pliers DESCRIPTION Jonard’s long nose and side cutting pliers are made of heat treated chro...

JONARD TOOLS | PART #JIC-683 Linesman's Side Cut Pliers DESCRIPTION Jonard’s lineman’s pliers are made of heat-treated chrome vanadium steel with i...

JONARD TOOLS | PART #JIC-685 Lineman's Pliers with Fish Tape Puller & Crimper DESCRIPTION Jonard’s lineman’s pliers are made of heat treated ch...

JONARD TOOLS | PART #MDC-64 Large Fiber Duct Cutter DESCRIPTION Designed to cut large fiber ducts up to 64 mm (2.52”) in diameter, this fiber duct ...

JONARD TOOLS | PART #MDC-125 Large Fiber Duct Cutter with Extra Long Handles DESCRIPTION Designed to cut large fiber ducts up to 64 mm (2.52”) in d...

JONARD TOOLS | PART #KS21257L3 L3 Type Cut Crush Strip Pliers DESCRIPTION Jonard’s long nose pliers are made of heat treated carbon steel with indu...

JONARD TOOLS | PART #SDC-3810 Keystone Slotted Screwdriver, 3/8 x 10 inch DESCRIPTION Jonard's Keystone Slotted Screwdrivers are made with an S2 st...

JONARD TOOLS | PART #G100/R3278INS Insulated Wire Wrapping Tool DESCRIPTION Designed for wrapping 18-32 AWG (1.00-0.20 mm) wire using our full rang...

JONARD TOOLS | PART #JIC-2257 Insulated Wire Loop Puller DESCRIPTION The Jonard Tools JIC-2257 Insulated Wire Loop Puller facilitates pulling wire ...

JONARD TOOLS | PART #INP-2065 Insulated Long Nose Pliers, 6 1/2 inch DESCRIPTION Jonard's insulated pliers are made of chrome vanadium steel with i...

JONARD TOOLS | PART #INP-1072 Insulated Lineman's Combo Pliers, 7 1/2 inch DESCRIPTION Jonard's insulated pliers are made of chrome vanadium steel ...

JONARD TOOLS | PART #AR-910672  Insertion And Extraction Tool DESCRIPTION Compatible with nearly all connectors conforming to M81969/1-02, this too...

JONARD TOOLS | PART #MOS-2428 Insertion Tool (24-28 Pins) DESCRIPTION Designed to insert internal components into DIP Sockets as well as LSI, MSI, ...

JONARD TOOLS | PART #MOS-1416  Insertion Tool (14-16 Pins) DESCRIPTION Designed to insert internal components into DIP Sockets as well as LSI, MSI,...

JONARD TOOLS | PART #A-4600  Insertion Tool Contact Size 12 DESCRIPTION Compatible with nearly all connectors conforming to MIL-C-26482, MIL-C-2650...

JONARD TOOLS | PART #A-4599 Insertion Tool Contact Size 16 DESCRIPTION Compatible with nearly all connectors conforming to MIL-C-26482, MIL-C-26500...

JONARD TOOLS | PART #A-4598 Insertion Tool Contact Size 20 DESCRIPTION Compatible with nearly all connectors conforming to MIL-C-26482, MIL-C-26500...

JONARD TOOLS | PART #JIC-3209 Insulated Cable Sewing Needle DESCRIPTION The Jonard Tools JIC-3209 Cable Sewing Insulated Needle is designed to harn...

JONARD TOOLS | PART #KN-300INS Insulated Cable Dismantling Knife with Blade Guard DESCRIPTION Designed with a blade guard and replaceable straight ...