GMP | F Cable Block | #GMP08093
F Cable Block (P08093)
DESCRIPTION
This Cable Block is perfect for temporarily supporting any cable up to 2 3/4 in. (70mm) diameter on 1/4 – 3/8 in. (6-10mm) dia. suspension strand during new construction or while overlashing to existing lashed cable
- The frame and sheave are made from 100% heat treated aluminum alloy
- Oilite bearings on the sheave and steel inserts on the underside of each strand hook provided for smoother operation and less wear and tear
- Built-in lever controls both the keeper and spring-loaded cam during installation and removal
- The cam holds the block firmly in position during pulling in, then releases during lashing so that the block can travel ahead of the lasher towards the end of the span
- Optional spring loaded keeper is available to keep smaller cables captured in the pulley
Ordering Information:
| P/N | Description | Weight |
|---|---|---|
| 08093 | F Cable Block | 3 lbs.12 oz. (1.7 kg) |
| 74168 | F Cable Block 6 Pack | 23.5 lbs. (10.7 kg) |
| 70193 | F Cable Block w/Keeper | 3 lbs.12 oz. (1.7 kg) |
Common Questions About the GMP F Cable Block
What is the GMP F Cable Block?
The GMP F Cable Block is an aerial support block designed to temporarily support a single cable on suspension strand during new construction or overlashing operations.
What is the GMP F Cable Block used for?
It is used to support and guide cable up to 2 3/4 inches in diameter on bare strand while pulling in cable and during overlashing to existing plant.
Who is the GMP F Cable Block designed for?
This cable block is designed for aerial fiber crews, telecommunications contractors, and utility teams performing new builds or overlash work on suspension strand.
What makes the GMP F Cable Block different from standard cable blocks?
This block features a built in lever that controls both the keeper and spring loaded cam, allowing the block to lock in place during pulling and automatically release to travel ahead of the lasher during lashing.
At a Glance
• Supports cable up to 2 3/4 inch diameter
• Designed for 1/4 inch to 3/8 inch suspension strand
• Heat treated aluminum alloy frame and sheave
• Cam locks during pull and releases during lashing
• Oilite bearings and steel inserts for smooth operation