VeEX | FX41xT PON Terminated Power Meter, 1G/10G - 1490/1577nm with VFL & FCC-250 Fiber Cleaner | #FX41-FCC250
FX41xT PON Terminated Power Meter, 1G/10G - 1490/1577nm with VFL
Provides fast, simple, and precise measurement of G-PON and XGS-PON downstream signals. Miniature filters ensure each wavelength is measured accurately. The tester is well suited for installation, service verification, and troubleshooting of co-existent networks, including IEEE based E-PON and 10G-EPON deployments.
FEATURES
- Downstream signal verification for 1G/10G PON networks
- Simultaneous 1490/1577 nm signal level measurements
- Pass/Fail indication per ODN Class or User thresholds
- Alkaline or rechargeable NiMH batteries with Auto- off
- Save up to 2000 measurements with date and timestamp
- Save/display test results via NoApp® QR code for mobile device transfer, post-processing, sharing, and upload
- Cloud-based NoApp® service (included) allows for data augmentation via mobile phone or tablet. Secured and always up to date. No installation or updates required.
- Micro USB interface for 5V DC powering and battery charging
- High contrast backlit, monochrome display - visible outdoors and indoor with varying light conditions
- Splash and dust resistant keypad and chassis design
- Rugged polycarbonate chassis for demanding field conditions
- Fixed SC/APC connector interface with protective dust caps
- Visual Fault Locator (VFL) option
- Broadband Optical Power Meter (OPM) option
SPECIFICATIONS
- Wavelength-selective level measurements:
- G-PON per ITU-T G.984.2
- XGS-PON per ITU-T G.9807.1
- EPON & 10G-EPON per IEEE 802.3av
- Calibrated PON wavelengths (Downstream):
- 1490 nm (G-PON)
- 1577 nm (XGS-PON)
- Selective Spectral Passband
- Accurate measurements even in the presence of other wavelengths
- 1490 nm (1480 to 1500 nm)
- 1577 nm (1572 to 1582 nm)
- Display Resolution: 0.1 dB
- Absolute Accuracy: ± 0.5 dB
- Communication Interface: Contact-less QR codes
- Battery Charging Interface: Micro-USB
- Battery Operating Time: ≥ 75 hours (without backlight)
SPECIAL NOTICE:
Attention! The Jumper needs to be cleaned before being inserted into the
meter! The dust caps must be closed after each use to prevent dust as dirt
buildup which will cause contamination. We recommend the Jonard FCC-250
One click cleaner to clean the end faces of the jumper as well as the bulkhead
fitting on the FX41 before each measurement is taken.
IF proper cleaning is not followed, this could lead to the FX41 reading low light
levels.
If FX41 and end faces of jumper aren’t cleaned properly;
IT COULD VOID THE WARRANTY by accumulating dirt in the bulkhead fitting of
the meter, thus contaminating the bulkhead fitting. This is a chargeable repair
if the bulkhead fitting needs replaced.
WARRANTY INFORMATION
https://www.veexinc.com/support/warranty
JONARD | FC, SC, ST Fiber Connector Cleaner 2.5mm | #FCC-250
JONARD TOOLS | PART #FCC-250
FC, SC, ST Fiber Connector Cleaner 2.5mm
DESCRIPTION
Featuring a patented 360° rotational tip for extra-wide cleaning, the FCC-250 Fiber Connector Cleaner provides exceptional cleaning performance on 2.5 mm ferrules in recessed fiber optic adapters or individual FC, SC, and ST connectors. This fiber connector cleaner features the following.
- Slide-Guide™ non-slip micro tape feeder guarantees consistent cleaning
- Dual rotational tip and one-push operation makes cleaning ferrule end-faces quick and easy
- Flip-open cap makes it easy to insert connectors for cleaning
- Can be used for over 800 cleanings and has a visual indicator to see how much cleaning material is left
- Static-free housing and cleaning cloth make this tool perfect for ESD-safe work
- Great for many applications (satellite communication systems, military and civilian maritime optical networks, aviation, broadcasting and HDTV, fiber to the antenna for WiMax and cellular networks, outside plant and fiber to the home, cable television head end, data centers, telecom central offices) and crush resistant to over 250N, impact resistant to survive drops over 1.5M
- Jonard cleaners meet or exceed all current and emerging standards for fiber cleanliness in high power laser applications (Telcordia GR-2923-CORE, iNEMI, IEC 61300-3-35, Cisco EDCS 7027180)